2 x 5000 litre heavy duty mix tanks. This is the second pair that our customer has ordered. These tanks are to replace some old tanks the customer bought second hand 20 years ago, and is upgrading his whole operation. So while the old tanks did the job after a fashion, he now has a world class set up.
A repeat customer asked for a tank to be fabricated in 316 grade stainless steel. We convinced them to make the product in SAF 2205 to avoid rust spots from vapor condensing on the underside of the lid.
Stainless Tank and Mix built this replacement trade-waste tank exactly the same as the existing unit so that the surrounding infrastructure and pipework would connect back up easily.
European made filling machine for filling powdered product into 25kg bags kept jamming. A new, relatively complex, PTFE coated chute was manufactured for it. This is what we do.
High quality pharmaceutical grade tanks redone by Stainless Tanks and Mix. A new sparge pipe was fitted through the side and nozzles in the top were modified a little for items like a sightglass and a light point.
400 litre steam jacketed pneumatic drive mixer. Included is a tidy pump base braced off the bottom of the legs to allow the pump to 400 litre steam jacketed, insulated and clad mix tank comprising of an anchor shear combination with multiple product inlets and nozzles.
500 litre mobile mix tank in SAF 2205 grade stainless steel. The mixer is a pneumatic drive mixer appropriately sized for the application. Included is a tidy pump base braced off the bottom of the legs to allow the pump to be set up and move with the tank as required.
A 75 litre & 50 litre jacketed tank assembly complete with transfer pumps, "think top" butterfly and diversion valves, Allen Bradley HMI panel, electrically heated water jackets with temperature sensor control, sightglass for water jacket level.
Our customer needed more hot water capacity for his CIP process, so the solution was a 5000 litre steam jacketed tank to heat and store hot water for use.
A 3000 litre vacuum / pressure rated with steam jacket, contra-mix kettle handcrafted with care and passion. This is a replacement for an existing vessel which was past its use by date and has given more trouble than it is worth.
A customer came to us for 8 custom 30 litre pots for a lab scale pilot plant, but our standard design was too expensive, so we removed the knuckle, welded from one side only, no grinding of the weld and the new price was accepted.
We replaced a vessel which had been collapsed by the power of vacuum. Another product from our Stainless Tank and Mix workshop in Minto.
Another custom fabricated item designed and built to customers detail by Stainless Tank and Mix in our Minto workshop
Stainless Tank and Mix fabricated 3 small custom pressure vessels in our Minto workshop. Produced quickly and expertly for a a customer.
Three 12,000 litre jacketed mix tanks for a multinational beverage company. These tanks are insulated to the side and clad with seal welded stainless steel cladding.
A mobile stainless steel process tank replaced with a cleaner design which is much easier to clean.
Mix tank inlet transition that had become paper thin. Keeping stainless steel equipment is so much easier and the longevity is a big factor.
Nut curing silos 16m3 - the client requested we fabricate 2 design approaches to hot air supply to see if it made any difference.
1000L open top tank with a loose fit lid and offset cone bottom fitted with a mixer bracket and framework under the tank to facilitate lifting with a forklift or pallet jack and provide a frame to mount their pump.
200L stainless steel concrete mixer for a pharmaceutical company overseas, with all welds ground out. Tricky but we maintained strength and finish.
Rotary sifter fabricated for a repeat customer. Complete stainless steel fabrication with stainless bearings in plastic housings.
A 6000 litre steam-jacketed mixer to blend 20,000cps product - it required a lot of work to tease out the actual requirements, but we finally got there. Another delighted customer.
Custom Stainless Steel Fabrication done right the first time, and made to last - that has been the Stainless Tank and Mix way for over 40 years, creating the right solutions for a range of industries
Designed and built this mobile catch hopper for a first time customer. We first modelled the sifter that fed the hopper so as to make sure the hopper would fit…
We designed and fabricated this 76,000 litre silo for very hot water in SAF2205 duplex material complete with Rockwool insulation and stainless steel sheet metal cladding. And then we delivered…
The customer needed to replace some existing engine after coolers and selected them to be built in stainless steel. It was important that the details matched, particularly the connection nozzles.…
All stainless steel construction including the platform; platform has a double pallet loading bay with a roll-over safety gate and access to the rear of the blender for cleaning and access to the dust extraction points.
