A 29,700 Litre Milk Silo Under a 4.8 m Awning
How we designed a 29,700 litre insulated milk silo to fit under a 4.8 m awning on an existing 3.2 m plinth, modelled in 3D before a sheet was cut.
A 1,500 Litre Cream Capture Tank Built for a Tight Height Limit
A wide, low 1,500 litre jacketed cream capture tank holding cream at 4°C, with a side entry manway and mixer to fit a 1.7 m height limit. CIP-ready, fully drainable.
Three 7,000 Litre Milk Ageing Tanks for a Low-Ceiling Room
Three insulated 7,000 litre milk ageing tanks for a low-ceiling dairy room: two-piece hygienic agitator shafts, CIP-cleaned overflows and seal-welded cladding.
Stainless Steel Silo Design for Food and Beverage Plants: Capacity, Discharge and Hygiene
How to size and specify a stainless steel silo: delivery and buffer volume, transport limits, liquid vs powder design, insulation and Australian standards.
Process Water Storage Tanks
Process water storage tanks - two 100,000 litre and one 30,000 litre tanks were fabricated by Stainless Tanks and Mix. One of the 100kl and the 30kl tank are 316 grade stainless steel for chilled water and the second 100kl is in SAF 2205 for hot water.
5000 Litre Heavy Duty Mix Tanks
2 x 5000 litre heavy duty mix tanks. This is the second pair that our customer has ordered. These tanks are to replace some old tanks the customer bought second hand 20 years ago, and is upgrading his whole operation. So while the old tanks did the job after a fashion, he now has a world class set up.
8000 Litre Mix Tank
A repeat customer asked for a tank to be fabricated in 316 grade stainless steel. We convinced them to make the product in SAF 2205 to avoid rust spots from vapor condensing on the underside of the lid.
Replacement Trade-Waste Tank
Stainless Tank and Mix built this replacement trade-waste tank exactly the same as the existing unit so that the surrounding infrastructure and pipework would connect back up easily.
European-made Filling Machine
European made filling machine for filling powdered product into 25kg bags kept jamming. A new, relatively complex, PTFE coated chute was manufactured for it. This is what we do.
High quality pharmaceutical grade tanks
High quality pharmaceutical grade tanks redone by Stainless Tanks and Mix. A new sparge pipe was fitted through the side and nozzles in the top were modified a little for items like a sightglass and a light point.
400 litre steam jacketed pneumatic drive mixer
400 litre steam jacketed pneumatic drive mixer. Included is a tidy pump base braced off the bottom of the legs to allow the pump to 400 litre steam jacketed, insulated and clad mix tank comprising of an anchor shear combination with multiple product inlets and nozzles.
500L mobile mix tank – SAF 2205 grade stainless steel
500 litre mobile mix tank in SAF 2205 grade stainless steel. The mixer is a pneumatic drive mixer appropriately sized for the application. Included is a tidy pump base braced off the bottom of the legs to allow the pump to be set up and move with the tank as required.
75L & 50L Jacketed Tank Assembly
A 75 litre & 50 litre jacketed tank assembly complete with transfer pumps, "think top" butterfly and diversion valves, Allen Bradley HMI panel, electrically heated water jackets with temperature sensor control, sightglass for water jacket level.
30 Litre Pots
A customer came to us for 8 custom 30 litre pots for a lab scale pilot plant, but our standard design was too expensive, so we removed the knuckle, welded from one side only, no grinding of the weld and the new price was accepted.
The Power of Vacuum
We replaced a vessel which had been collapsed by the power of vacuum. Another product from our Stainless Tank and Mix workshop in Minto.
Stainless Steel Custom Fabricated Item
Another custom fabricated item designed and built to customers detail by Stainless Tank and Mix in our Minto workshop